Prepare your Bonaire unit
NOTE: This section only needs to be followed for the first smartphone in your household. Second and subsequent smartphones can go directly to Device Sharing page. If your home’s Wi-Fi settings change (for example when a new modem is installed), the following steps must be followed to reconfigure the MyClimate device with your new network details).
-
1
With your Navigator OFF, Press the SETUP button. Your Navigator will display Clock, Program and Advanced icons on the screen. Currently the Clock icon will be flashing.
-
2
Press the
or
button to select Advanced
and
press ENTER.
-
3
The screen will display “USEr”. Press ENTER.
-
4
Press the
or
button to select the Interface kit ID (beginning
with th) your installer recorded above
and press ENTER.
-
5
The lower screen will display “1 0” (the number on the left will be flashing). Press ENTER to select parameter 1. Note that on an RF Navigator the display may show “1 --" for up to 30 seconds before you can select it
-
6
Press the
or
button to change the digit
to 1 (the screen will
show “1 1”, and the 1 on the right will be flashing). Press
ENTER to set the parameter.
-
7
Press the ON/OFF button to exit
-
8
Your BONAIRE heater or evaporative cooler is now in Wi-Fi Setup mode.
